Home > Pidegree Gloves > Faqs  

 Initial Order

1.What is the maximum quantity load for 20ft and 40ft container?

In order to assist our customer to save the freight per carton cost, Pidegree Glove has fully maximized the container space for every of its product as per below:

i) Latex Examination Gloves
Powdered 1,661 cartons per 20ft container
3,130 cartons per 40ft container
Powder-Free 1,340 cartons per 20ft container
2,750 cartons per 40ft container
ii) Nitrile Examination Gloves 1,270 cartons per 20ft container
2,700 cartons per 40ft container
iii) Vinyl Examination Gloves 1,450 cartons per 20ft container
3,000 cartons per 40ft container
iv) Sterile Surgical Gloves 534 cartons per 20ft container
1069 cartons per 40ft container
v) Household Gloves 1100 cartons per 20ft container
2100 cartons per 40ft container
vi) Polyethylene Gloves 960 cartons per 20ft container
1963 cartons per 40ft container

2. Can I mix different products in a container?
At Pidegree Glove, meeting our customers' needs is our main priority, hence flexibility is practised. We allow different types of gloves (e.g. latex, surgical, vinyl and household gloves) gloves to be shipped in one container resulting in lower cost freight benefits which are passed down to our customers. In short, we provide and allow mix containers to suit our customers' requirement.

3. Can I have the gloves in my own private brand?

Yes, you may have your own brand. However, we would require your artwork or, we can even design one that can suit your requirements to provide you with that value-added services from Pidegree Glove. (For 1st time basis, printing block changes will be incurred for private brand.)

4. What are the disadvantages of Loose Container Loading (LCL)?

Customers are NOT advised to purchase a LCL shipment due to the several reasons indicated below:
1. Freight cost per carton is higher than FCL shipment.
2. It can cause contamination on the gloves when combine with other products in the same container that yield bad smell.
3. It can also cause cartons damage due to multiple handling during LCL shipment.

5. What are the advantages of Full Container Loading (FCL)?

Customers are advised to purchase a FCL shipment due to the several reasons indicated below:
1. Freight cost per carton is cheaper.
2. Less damaged to the cartons during transportation time.
3. Better protection on glove quality as the gloves are not shipped together with other products.

6. What is my minimum purchase per order?

The minimum order is half a container load. However, if you happen to be our 1st time customer, and wish to go on a trial basis, we are prepared to consider the minimal quantity but on a case-to-case basis.

7. What are the modes of payment that you can offer?

The normal modes of payment are either by Telegraphic Transfer (TT) or Letter of Credit (LC-To be accepted / authenticated by our Banks).

8. What is the shipment lead time?

The shipment lead time is about 4 to 5 weeks upon receipt of TT payment or LC for examination gloves. For surgical gloves, household and vinyl gloves, the lead time will be about 6 to 7 weeks. For repeat orders, the lead time is expected to be shorter.

9. What are your main product range?
Our wide product range is to cater for our customers' needs and convenience. This is also in line with Pidegree Glove being a 'One -Stop Glove Sourcing Center'.

10. Do you offer in-house brand?

Yes, we can offer our in-house brand to you provided that the in-house brand is currently not used by our existing customer on an exclusive basis in that particular country.

11. Where are your gloves manufactured?

For Latex gloves :  Malaysia
For Nitrile gloves : Malaysia
For Vinyl gloves : China.

12. Do you produce size XXL?

Yes, we produce size XXL gloves. However, this is considered as a special product to us and we request minimum order quantity of 200 cartons.

      General Information
      Quality Assurance